PE Pipe Extrusion Process (2)

Extrusion Basics

The function of the extruder is to heat, melt, mix, and convey the material to the die, where it is shaped into a pipe . The extruder screw design is critical to the performance of the extruder and the quality of the pipe. The mixing sections of the screw are important for producing a homogeneous mix when extruding blends. A typical extruder is shown in Figure 2.

There are many different types of screw designs , but they all have in common the features shown in Figure 3. Each screw is designed specifically for the type of material being extruded.

The extruder screw operates on the stick/slip principle. The polymer needs to stick

to the barrel so that, as the screw rotates, it forces the material in a forward direction.

In the course of doing this, the polymer is subjected to heat, pressure and shear (mechanical heating). The extent to which the material is subjected to these three conditions is the function of the screw speed, the barrel temperature settings and the screw design. The design of the screw is important for the production of high quality pipe.

If a natural resin and concentrate blend is used, the screw will also have to incorporate the colorant into the natural resin. Various mixing devices are used for this purpose as shown in Figure 4. They include mixing rings or pins, fluted or cavity transfer mixers, blister rings, and helix shaped mixers, which are an integral part of the screw.

The pipe extrusion line generally consists of the extruder, die, cooling systems, puller, printer, saw and take-off equipment. Each of these items will be addressed in the following section.