How to Make Plastic Pipes

             How to Make Plastic Pipes

Plastic has largely become the material of choice for pipes. Its flexibility, ease of bonding, lighter weight than iron and steel and lower cost than copper has made it a common choice. Pipe is generally produced by an extrusion process. Although this process may vary in actual operating conditions (temperatures, pressures, extrusion rate) based on the type of plastic used, diameter of pipe and wall thickness, the fundamental process of extrusion is reasonably consistent throughout the industry. 

• Add the thermoplastic resin to the feed hopper. Although this can be done manually, it is generally transferred to the hopper via a vacuum feeder due to the steady state nature of the process. This helps minimize the chance of running out of resin during the process.
• Turn on machine screw and barrel heaters per specific resin requirements. The heaters add heat to the plastic while it is in the barrel to melt the plastic. The rotating screw adds shear heat to the plastic for melting as well as building up the pressure to force the plastic through the die.
• Extrude plastic through the die. The die is designed and built based on the dimensions desired in the pipe and the shrink rate of the type of plastic being used.

• Cut the pipe at the desired length. The extruded pipe will exit the die onto a roller system to allow the pipe to cool without deforming under its own weight. Once it has passed a certain length, it will trip a sensor (electric eye) triggering a cutting operation on the pipe. The cut is made by a cutter that moves forward at the rate of pipe extrusion to offset the motion of the pipe moving forward so that the end of the pipe will remain perpendicular to the pipe wall after it is cut.
• Continue the process in a steady-state environment until the desired quantity of plastic is produced.